How one can Make Easy Kitchen Curtains

Kitchen curtains are comparatively straightforward to make as a result of

 

  1. you solely have to have the ability to sew in straight strains
  2. kitchen home windows are usually smaller than different home windows in your home – and so do the curtains – no big lengths and widths of cloth which could be troublesome to take care of
  3. washable light cotton curtains are finest for kitchens and these materials are straightforward to deal with when sewing

 

Listed below are the straightforward steps to make your kitchen curtains.

1. Measure your Curtains

Width

Measure the width of the rod – this would be the width of every completed curtain panel in a pair of curtains if you wish to obtain an inexpensive fullness after gathering.

Size

Take the size (or drop) of your curtains as ranging from the rod to 2 or three inches beneath the sill for window- size curtains or to the floor for floor size curtains (shorter is mostly higher in a casual room like a kitchen)

2. Work Out How a lot Material You Want

On high of the size you will have about 4 inches for a high header and 6 inches for a backside hem and about 4 inches on high of the width of every curtain panel for the facet seams. (Keep in mind to incorporate each curtains in your calculations when understanding how a lot cloth you want 용인커튼).

Material is available in mounted widths. Try to get the appropriate width so that you just solely want one width for every curtain panel. Don’t be concerned if it’s a bit too huge. You possibly can enhance the gathers. If the material isn’t huge sufficient you may be part of lengths collectively. Keep in mind to incorporate the extra seams in your calculations.

In case your cloth has a sample you will have to line it up between the 2 curtains. Take any wastage right here into consideration. You do not have to fret an excessive amount of with a small sample repeat.

If the material isn’t pre-shrunk add a ten% allowance for shrinkage

3. Put together the material

Wash and iron the material in order that any shrinkage takes place BEFORE you make your curtains with it.

Minimize out the items as required ensuring to match up any massive patterns and have the sample working in the appropriate course on each curtains.

4. Sew

Be part of any lengths collectively as required for huge curtains. Pin, sew and press the seams. Then fold and stitch the facet seams of every curtain panel to neaten the sides. Fold excessive 4 inches of the curtain panels in direction of the within and press, then fold below 2 inches and press to make a 2inch hem. Sew this hem near the underside of the seam (leaving an roughly two inch channel for the curtain rod).

5. Cling and End the Curtains

Leaving the underside hems untouched hold the curtains on the curtain rods then pin up the hems. (That is one of the best ways of getting the appropriate size). Take the curtains down and end off the underside hems neatly after folding, pinning and urgent. Do not reduce off extra materials inside cause – a bigger hem might be heavier and can assist the curtain hold effectively. Simply fold below an inch or so then press for neatness after which create a 4 or 5 inch hem to match on every curtain panel.